How to Add or Change User Codes on Paradox Magellan and Spectra SP Equipped with TM50/70 Touchscreen Keypads

Modifying User Codes on a Paradox Magellan/Spectra System with a TM50/70 Touch Screen Keypad

This guide is applicable for all Magellan and Spectra SP Systems equipped with TM50/70 touch screen keypads.
For systems fitted with a push button keypad, refer to this guide: Modifying User Codes on a Paradox Magellan/Spectra System with a Push Button Keypad
If you require help adding or removing user codes, please lodge a support ticket and someone from our support team can walk you through the process or book a technician appointment to assist.

Add a User Code

  1. On the keypad, press the [Menu] button.
  2. Press [System Setup].
  3. Enter your [Master Code] or [Area Master Code].
  4. From the master programming menu, press [Users].

  5. Find an empty user slot you'd like to add a new user to, or an existing user you'd like to modify and press the  button.

    Please notify us before altering the MASTER, INSTALLER, or AREA MASTER user codes if your system is being monitored.
    This is to ensure that our service technicians can access your system as needed. Failure to do so may result in additional fees for resetting these codes.
  6. Enter user name and press the [Next] button
  7. Enter the new user code and press the [Save] button.
  8. Confirm the new user code by entering it a second time, then press [Save].
  9. You will have the option to learn in a remote at this point. To do so, press the button on the remote or press [Skip] to skip this step.
The new user is now valid.

Delete a User Code

  1. Follow steps 1-4 above to access the user programming menu.
  2. Select the user code you wish to delete.
  3. Press the  button to remove the user code.
The user code has now been deleted.

    • Related Articles

    • How to Arm & Disarm Your Paradox Magellan/Spectra Alarm

      In this article, we will go over the different methods for arming and disarming your Paradox Magellan/Spectra alarm system, including Regular arming, Sleep arming, and Stay arming. We will also provide instructions on how to disarm an armed system ...

    • Adding, Change or Removing User Codes - Bosch/Solutions 16 Alarm

      Adding or Changing User Codes Only the Master Code holder can add or change other system user codes including two Auxiliary Codes and the Master Code itself. The Master Code is factory default as User 1, however, multiple user codes can be assigned ...

    • Bosch Solutions 16 Alarm Systems - Adding and Deleting User Codes

      This article is for alarms with these type of keypads This guide is for users familiar with Bosch Alarm Systems. It covers the process of adding and deleting user codes for the system. It is important to note that only the Master Code holder can add ...

    • Modifying User Codes on a Paradox Magellan/Spectra System with a Push Button Keypad

      1. Press the [] Key Visual Feedback 2. Enter your [MASTER CODE]. [] and [1] flash. When a number on the keypad is lit, the user is already programmed. 3. Select a user by entering a 2-digit user number (01 to 32). “Arm” flashes 4. Enter a 4- or ...

    • Paradox Fault Analysis Mode

      This article does not apply to systems with touchscreen keypads It is important to be aware of the various trouble conditions that can be reported to your monitoring station. When a trouble condition occurs, the TBL key or light on your keypad will ...