Modifying User Codes on a Paradox Magellan/Spectra System with a Push Button Keypad
| 1. Press the [ | Visual Feedback |
2. Enter your [MASTER CODE]. | [ When a number on the keypad is lit, the user is already programmed. |
| 3. Select a user by entering a 2-digit user number (01 to 32). | “Arm” flashes |
4. Enter a 4- or 6-digit [USER CODE]. | “Sleep” flashes |
5. Confirm the [USER CODE]. | “Stay” flashes. |
6. To register a remote, press and hold any remote button for 3
seconds. Release. Press and hold any remote button for 3
seconds. If you do not wish to assign a remote, press
[ENTER]. | “Off” flashes. |
To program another user, go to step 3. To exit, press [CLEAR]. For partitioned systems, continue to step 6A. | |
6A. Press [1] and/or [2] to assign the user to a partition.
Press [ENTER]. | |
To program another user, go to step 3. To exit, press [CLEAR]. |
Your system can be programmed to use either 4- or 6-digit user codes, where each digit can be any value from
0 to 9. Six-digit codes are considered more difficult to “crack” and therefore, more secure. Avoid programming
simple or obvious user codes, such as your telephone number, address, or codes such as 1234.
Related Articles
Modifying User Codes on a Paradox Magellan/Spectra System with a TM50/70 Touch Screen Keypad
This guide is applicable for all Magellan and Spectra SP Systems equipped with TM50/70 touch screen keypads. For systems fitted with a push button keypad, refer to this guide: Modifying User Codes on a Paradox Magellan/Spectra System with a Push ...How to Arm & Disarm Your Paradox Magellan/Spectra Alarm
In this article, we will go over the different methods for arming and disarming your Paradox Magellan/Spectra alarm system, including Regular arming, Sleep arming, and Stay arming. We will also provide instructions on how to disarm an armed system ...Adding, Change or Removing User Codes - Bosch/Solutions 16 Alarm
Adding or Changing User Codes Only the Master Code holder can add or change other system user codes including two Auxiliary Codes and the Master Code itself. The Master Code is factory default as User 1, however, multiple user codes can be assigned ...Bosch Solutions 16 Alarm Systems - Adding and Deleting User Codes
This article is for alarms with these type of keypads This guide is for users familiar with Bosch Alarm Systems. It covers the process of adding and deleting user codes for the system. It is important to note that only the Master Code holder can add ...Paradox Fault Analysis Mode
This article does not apply to systems with touchscreen keypads It is important to be aware of the various trouble conditions that can be reported to your monitoring station. When a trouble condition occurs, the TBL key or light on your keypad will ...