Walk Test Mode - Bosch/Solutions 16 Alarm

Walk Test Mode - Bosch/Solutions 16 Alarm

Walk test mode allows you to test detection devices to ensure that they are functioning correctly. Before activating walk
test mode, isolate any zones that are not required for testing. Refer to "Isolating Zones"

How To Enter Walk Test Mode

  1. Enter the master code followed by 4 and the AWAY button. (eg. 2580 + 4 + AWAY)
    Three beeps will be heard and the STAY and AWAY indicators will begin to flash. The keypad will beep once every second while the system is in the walk test mode.
  2. Unseal and seal the zones to be tested. The keypad will sound a long beep while the horn speaker will sound a short beep every time a zone is sealed or unsealed.
  3. Press the AWAY button to exit this mode.
    Two beeps will be heard and the STAY and AWAY indicators will extinguish.

    • Related Articles

    • Testing Your Bosch Solutions 16 Alarm System

      It is important to regularly test your Bosch Solutions 16 alarm system to ensure that it is functioning properly and meets all necessary compliance standards. Insurance companies may also require annual servicing. System Tests To test the different ...

    • Zone Types - Bosch/Solutions 16 Alarms

      There are sixteen different zone types to choose from. Each zone has the ability to be programmed as any one of the types listed below. Zone Types Zone Type Description Zone Type Description 0 Instant 8 Delay-1 + Isolated In STAY Mode 1 1 Handover 9 ...

    • My Alarm Won't Stop Beeping - Bosch/Solutions 16

      This article is for keypads that look like this If a system fault should occur, the FAULT or MAINS indicator will flash and the keypad will beep once every minute. If the AC mains supply has failed, the MAINS indicator will flash until the AC mains ...

    • How to Fix a Bosch Solutions 16 Alarm System That Won't Arm

      If you are having trouble arming your Bosch Solutions 16 alarm system, there are a few steps you can try before contacting tech support. Bypassing Zones Sometimes it is necessary to bypass certain zones of your alarm system when it is being armed. ...

    • Bosch Solutions 16 Alarm Systems - Adding and Deleting User Codes

      This article is for alarms with these type of keypads This guide is for users familiar with Bosch Alarm Systems. It covers the process of adding and deleting user codes for the system. It is important to note that only the Master Code holder can add ...