How to Arm/Disarm Paradox Magellan & Spectra Systems with TM50/70 Keypads

Steps

1. Select the arming method by pressing the corresponding button from the main screen.
   
2. Enter your user code (4 to 6 digits).
   
3. Onscreen exit delay countdown will start and your keypad will beep as the delay counts down.

• Related Articles

• How to Arm & Disarm Your Paradox Magellan/Spectra Alarm

  In this article, we will go over the different methods for arming and disarming your Paradox Magellan/Spectra alarm system, including Regular arming, Sleep arming, and Stay arming. We will also provide instructions on how to disarm an armed system ...

• Paradox Fault Analysis Mode

  This article does not apply to systems with touchscreen keypads It is important to be aware of the various trouble conditions that can be reported to your monitoring station. When a trouble condition occurs, the TBL key or light on your keypad will ...

• Modifying User Codes on a Paradox Magellan/Spectra System with a TM50/70 Touch Screen Keypad

  This guide is applicable for all Magellan and Spectra SP Systems equipped with TM50/70 touch screen keypads. For systems fitted with a push button keypad, refer to this guide: Modifying User Codes on a Paradox Magellan/Spectra System with a Push ...

• Paradox Magellan - Other Alarm Types

  This article does not apply to systems with touchscreen keypads Your Paradox system has different types of alarms available other than just intruder alarms. Fire Alarms Upon a fire alarm, the bell/siren will emit three “squawks” at 2 second intervals ...

• Arm & Disarm - Bosch/Solutions 16 Alarm

  Disarming the Panel Enter a valid user code. Press the Hash [#] button. The keypad will beep 2 times when the panel is disarmed. Arming the Panel Enter valid user code. Press the Hash [#] button to arm. Two beeps will be heard. The AWAY LED/LCD ...