Adding, Change or Removing User Codes - Bosch/Solutions 16 Alarm

Adding, Change or Removing User Codes - Bosch/Solutions 16 Alarm


Adding or Changing User Codes

Only the Master Code holder can add or change other system user codes including two Auxiliary Codes and the Master Code itself. The Master Code is factory default as User 1, however, multiple user codes can be assigned to be a Master Code. Up to 32 user codes may be programmed to operate the system. User Code 33 and User Code 34 are Auxiliary Codes only.
In this Article 2580 is the master code

How To Add or Change User Codes

  1. Enter the Master Code followed by 1 and the # button (eg. 2580 + 1 + #) 
    Three beeps will be heard and the STAY and AWAY indicators will begin to flash.
  2. Enter the user code number (1 - 34) that you wish to add or change followed by the # button (eg. 2# = User 2 / 33# = Auxiliary Code 1 etc). Two beeps will be heard and the user number that you just selected will now display on the keypad indicators.
  3. Enter the digits required for the new code followed by the # button (eg. If you wish the user code to be 5768, you would enter 5768# - each user code can be up to 7 digits in length). Two  beeps will be heard and the STAY and AWAY indicators will extinguish.
    If you wish to add or change any further user codes, repeat this procedure as many times as required.

Deleting User Codes

Only the Master Code holder can delete other system user codes and Auxiliary Code 1 and 2.

How To Delete A User Code

  1. Enter the Master Code followed by 1 and the # button (eg. 2580 + 1 + #).
    Three beeps will be heard and the STAY and AWAY indicators will begin to flash.
  2. Enter the user code number (1 - 34) that you wish to delete followed by the # button (eg. 2# = User 2 / 33# = Auxiliary Code 1 etc). Two beeps will be heard and the user number that you just selected will now display on the keypad indicators.
  3. Press the * button to delete the user code that you have selected.
    Two beeps will be heard and the STAY and AWAY indicators will extinguish.
    If you wish to delete any further user codes, repeat this procedure as many times as required.

    • Related Articles

    • Bosch Solutions 16 Alarm Systems - Adding and Deleting User Codes

      This article is for alarms with these type of keypads This guide is for users familiar with Bosch Alarm Systems. It covers the process of adding and deleting user codes for the system. It is important to note that only the Master Code holder can add ...

    • Testing Your Bosch Solutions 16 Alarm System

      It is important to regularly test your Bosch Solutions 16 alarm system to ensure that it is functioning properly and meets all necessary compliance standards. Insurance companies may also require annual servicing. System Tests To test the different ...

    • Arm & Disarm - Bosch/Solutions 16 Alarm

      Disarming the Panel Enter a valid user code. Press the Hash [#] button. The keypad will beep 2 times when the panel is disarmed. Arming the Panel Enter valid user code. Press the Hash [#] button to arm. Two beeps will be heard. The AWAY LED/LCD ...

    • How to Change and Add User Codes on Hills/DAS/NX Reliance Alarm Systems

      In order to maintain the security of your system or for your own convenience, you may need to change or add user codes. This article will guide you through the process step by step. What are User Codes? User codes are 4-digit codes used to arm and ...

    • How to Fix a Bosch Solutions 16 Alarm System That Won't Arm

      If you are having trouble arming your Bosch Solutions 16 alarm system, there are a few steps you can try before contacting tech support. Bypassing Zones Sometimes it is necessary to bypass certain zones of your alarm system when it is being armed. ...